1. Must have a wheelbase of 105 inches, or less. Front wheel drive only. Minimum weight 2200 lbs.

2. All glass, chrome, plastic, mirrors, door handles, and flammable materials must be removed.

3. Doors must be welded or bolted shut.

4. Minimum of 3 driver protection bars made of 3/8-inch bar steel in front of the driver.

5. Must have complete floorboard and firewall – all holes must be filled with sheet metal. Rear firewall must be metal and in stock location.

6. Body panels must stay stock as possible; factory steel roof on all cars. Hood, trunk, and driver’s door must be on car at all times.

7. Must have racing seat, 5-point harness, window net, DOT approved helmet, and full racing suit must be worn at all times during race.

8. Must have tow chains on front and rear of car capable of lifting car.

9. Stock type bumpers only. No sharp edges or protruding bumpers. No bars outside of factory body.

10.  No radios and no mirrors allowed.

11.  Each car must have a working fire extinguisher.

12.  Battery must be mounted securely in a marine style box or racing style battery mount and securely fastened, if not in factory location.

 13. Must have functional brakes on all four wheels.

14.  Brake pedal and master cylinder must be in the original position. No aftermarket brake systems will be allowed.

15.  No modifying of suspension or frame. No adjustable suspension or racing struts. Fender wells may be trimmed for tire clearance.

 16. ROLL-CAGE – Must be frame-mounted, with at least 6-points, with 3 or more bars on driver’s side and 2 or more bars on passenger side.
  • Bars within driver’s reach must be padded.
  • Bars may protrude through firewall, but must stay inside body panels.
  • All bars must have a minimum thickness of .095 inch.

17.  May run locked trans-axles.

 18. Rev limiters may be removed.

 19. No turbo chargers or nitrous oxide.

 20. No aftermarket high performance parts will be allowed, with the exception of seat, seatbelts, safety equipment, cold air intake, and headers.

 21. All engines must be 4-cylinder and remain stock. All engines must match the make of car: Dodge to Dodge, Ford to Ford, etc. No Mazda rotary type engines allowed.

22.  All cars must have a main shutoff switch on driver’s side that is clearly marked “OFF.”

23.  Stock ignitions only.

24.  Oil coolers will be allowed, but must remain in stock location.

 25. Aluminum, factory, and 1-piece steel racing wheels will be allowed, with stock offset. No beadlocks.

 26. 1-inch lug nuts are required.

27.  Different sized steel-belted radial tires will be allowed on front and rear axles. No staggering of tires from side to side.

28.  No weight jacks.

 29. Gas fuel only, with no additives.

 30. No advance ignition timing.


* Rules are non-negotiable and will be enforced. Thank you for your cooperation.

Download Mini Stock Rules